Chimney information
Installation guide for chimney
This guide takes you through the various steps involved in installing a chimney.
Installation guide for semi-insulated chimney pipe
This guide takes you through the various steps involved in installing a semi-insulated chimney.
Template – cutout for chimney in sloped ceiling
This template makes it easier to calculate the cutout for the chimney if your ceiling is sloped.
Note! The template is in A3 format – 594 x 420 mm. When printing the template, you must perform a control measurement of 360 mm to ensure that no scaling has occurred during printing.
You can find the template here >
Chimney calculator
The chimney calculator makes it easy for you to create a parts list with the components you need for your new chimney.
See the Chimney calculator here >
CE marking – VARDE flue pipe
VARDE uninsulated flue pipe Ø150 mm
All our uninsulated chimney parts are CE marked. Markings for the individual uninsulated flue pipes can be found below.
Flue pipe uninsulated 250 mm with crimp, Ø150 mm
Flue pipe uninsulated 500 mm with crimp, Ø150 mm
Flue pipe uninsulated 500 mm with crimp and cleaning hatch, Ø150 mm
Flue pipe uninsulated 750 mm with crimp, Ø150 mm
Flue pipe uninsulated 1000 mm with crimp, Ø150 mm
Flue pipe uninsulated 1200 mm, Ø150 mm
Flue pipe uninsulated 1500 mm, Ø150 mm
Flue pipe uninsulated 1800 mm, Ø150 mm
Flue pipe uninsulated 3000 mm, Ø150 mm
CE approval for uninsulated flue pipe >
VARDE semi-insulated flue pipe Ø200 mm outer / Ø150 mm inner.
All our semi-insulated chimney parts are CE marked. This marking applies to all VARDE semi-insulated flue pipes.
Transition piece for semi-insulated pipe, Ø200 mm
Semi-insulated pipe 250 mm – black, Ø200 mm
Semi-insulated pipe 1000 mm – black, Ø200 mm
Semi-insulated pipe 1500 mm – black, Ø200 mm
CE approval for semi-insulated flue pipe >
CE approval for semi-insulated flue pipe – Klamova
VARDE fully insulated flue pipe Ø250 mm outer / Ø150 mm inner.
All our fully insulated chimney parts are CE marked. This marking applies to all VARDE fully insulated flue pipes.
Fully insulated chimney section with start 400 mm – black, Ø200 mm
Fully insulated chimney section with start 900 mm – black, Ø200 mm
Fully insulated chimney section including clamp 330 mm – black, Ø200 mm
Fully insulated chimney section including clamp 500 mm – black, Ø200 mm
Fully insulated chimney section including clamp 1000 mm – black, Ø200 mm
Fully insulated chimney section including clamp 15° – black, Ø200 mm
Fully insulated chimney section including clamp 30° – black, Ø200 mm
Fully insulated chimney section including clamp 45° – black, Ø200 mm
Fully insulated T-section including cleaning hatch 90° – black, Ø200 mm
Rain cowl – black
Connection to T-section – chimney top for wind-rotating cowl – black